Jumlah Pesanan Minimum:	200m
harga:	USD0.03-50
kemasan standar:	100m / roll atau disesuaikan
Periode pengiriman:	sesuai kebutuhan
Kapasitas Pasokan:	10 KM per minggu

Rincian Informasi

Deskripsi produk

Informasi Rinci

Tempat asal

Cina

Nama merek

QINGDAO YICABLE CABLE

Sertifikasi

CE/KEMA/ISO/PCCC

Tegangan pengenal:

0,6 / 1kV

Jumlah core:

1,2,3,4,5

Jaket warna:

setiap warna

Jaket:

PO atau FR-PVC

Sampel:

TERSEDIA

Bekerja di:

90℃

Fungsi:

Tahan Api

Menyoroti:

fire rated cable

fire resistant wire

Deskripsi produk

PO / FR-PVC Jacket FRLS Fire Resistant Cable 0.6KV 1KV For Power Distribution Lines

Application

This type of fire resistant and flame retardant cable is suitable for power distribution lines with requirements of flame-retardant or fire-resistant fixed installations.

Reference Standards:	IEC502-1983, IEC331-1970, etc.
Rated Voltage:	600/1000V (0.6/1kV)
Core Number:	Single Core, Two Core, Three Core, Four Core, Five Core (1C, 2C, 3C, 4C, 5C)
Available Dimensions:	1.5mm2, 2.5mm2, 4mm2, 6mm2, 10mm2, 16mm2, 25mm2, 35mm2, 50mm2, 70mm2, 95mm2, 120mm2, 150mm2, 185mm2, 240mm2, 300mm2, 400mm2, 500mm2, 630mm2.
Codes Available:	NH-VV, NH-YJV, NH-VV22, NH-YJV22, NH-VV32, NH-YJV32
Application:	Mica Fire Resistant Cable is used in the environment with high demand on fire-resisting performance such as high-rises building, power station, power plant, mine, chemical industry, subway, and so on. It is recommended that the installation instructions indicated by the Local Electric Code, or any equivalent, be followed, so that the safeguarding of persons and the integrity of the product will not be affected during installation.
Construction:	Mica Fire Resistant Cable
Conductor:	Stranded round copper conductor (Cu), copper wire annealed.
Insulation:	XLPE (Cross-Linked Polyethylene) or PVC (Polyvinyl Chloride)
Core Identification:	1 Core: Brown 2 Cores: Brown, Blue 3 Cores: Brown, Black, Grey 4 Cores: Blue, Brown, Black, Grey 5 Cores: Green/Yellow, Blue, Brown, Black, Grey Alternative core identification: White Cores with Black numbers
Filler:	Polypropylene filament with lapped binding tape
Separator:	Binding tape
Bedding:	PVC (Polyvinyl Chloride) or LSZH.
Armouring:	Single Core: Aluminium Wire Armoured (AWA) Multi-core: Steel Wire Armoured (SWA) or Steel Tape Armoured (STA)
Sheath:	PVC (Polyvinyl Chloride), flame retardant PVC, PE, LSOH, HFFR
Colour:	Black, Gray
Temperature Rating:	0℃ to 90℃ (XLPE), 0℃ to 70℃ (PVC) During short circuit (lasting less than 5 seconds) the maximum temperature of the cable conductor shall not be above 250℃ (160℃ for PVC) Environment temperature should be no lower than 0℃ for laying the cable.
Minimum Bending Radius:	Single Core Cable: Non Armored Cable 20D, Armored Cable 15D Cores Cable: Non Armored Cable 15D, Armored Cable 12D. Remarks: D means practical external diameter of the cable

Application conditions

1. The long-time permissible operation temperature of conductor shall not be higher than 70^oC.

2. Conductor maximum short circuit (not more than 5 seconds) temperature shall not be higher than 160°C.

3. The power cable is not limited by drop in level when being laid, and the ambient temperature shall not be lower than 0°C.

If so, the cable should be preheated.

4. Perfect chemical stability, resistant against acids, alkalis, grease and organic solvents, and flame.

5. Light weight, perfect bending properties, installed and maintained easily and conveniently.

PO / FR-PVC Jacket FRLS Fire Resistant Cable 0.6KV 1KV For Power Distribution Lines 0

Tag:

kawat tahan api,

kabel pengenal api,

kabel listrik tahan api

Produk yang Direkomendasikan

PVC / PE Insulated Fire Rated Cable, Kabel Listrik Bukti Api Single Core IEC60332

Hubungi Sekarang

Kabel Tahan Api FR 4 Cores Copper Conductor XLPE Insulated 0.6 / 1kV

Hubungi Sekarang

Three Cores 450V / 750V Kawat Tahan Api, Insulasi Kabel Tahan Api PE

Hubungi Sekarang

Kabel Tegangan Rendah Tahan Api Single Core Pvc Sheath Xlpe Insulation

Hubungi Sekarang

FRC Fire Safe Cable, Fire Electrical Cable XL Insulated CU Conductor

Hubungi Sekarang

Kabel Tahan Api CU / MICA / XLPE / PVC 0,6 / 1kV 4x240mm2 Untuk Daya Listrik

Hubungi Sekarang

Kabel Bebas Asap Api Rendah Halogen, Kawat Tahan Api LSZH

Hubungi Sekarang

0.6 / 1kV Kabel Tahan Api Ukuran 1.5sqmm ~ 800sqmm Empat Inti IEC 60331

Hubungi Sekarang

4 Cores FRC Fire Rated Armored Cable LSZH Sheathed 0.6 / 1kV Copper Conductor

Hubungi Sekarang

600 / 1000V Kabel Tahan Api XLPE Insulasi Flame Retardant Sheath

Hubungi Sekarang

Sheathed Fire Rated Kabel Daya 0.6 / 1kV Mika Tape 600 / 1000V Indoor Outdoor

Hubungi Sekarang

rincian produk

Produk

Kabel Berisolasi XLPE

PVC Insulated Kabel

Kabel Mineral Terisolasi

Lapis baja Kabel Listrik

Kabel Kontrol Multicore

Kawat Inti Tunggal

Terlindung instrumen kabel

Low Smoke Kabel Nol Halogen

Api Tahan Kabel

kabel tahan api

Kabel Fleksibel Karet

Aerial Bundled Kabel

Bare Conductor

Kabel Listrik Fleksibel

kabel pv surya

Kabel Cabang Pracetak

Kabel Suhu Tinggi

Tembaga Clad Aluminium Kawat

Kabel Las Fleksibel

kabel obor las

PO / FR-PVC Jacket FRLS Fire Resistant Cable 0.6KV 1KV For Power Distribution Lines

Jumlah Pesanan Minimum:	200m
harga:	USD0.03-50
kemasan standar:	100m / roll atau disesuaikan
Periode pengiriman:	sesuai kebutuhan
Kapasitas Pasokan:	10 KM per minggu

Informasi Rinci

Deskripsi produk

Informasi Rinci

Tempat asal

Cina

Nama merek

QINGDAO YICABLE CABLE

Sertifikasi

CE/KEMA/ISO/PCCC

Tegangan pengenal:

0,6 / 1kV

Jumlah core:

1,2,3,4,5

Jaket warna:

setiap warna

Jaket:

PO atau FR-PVC

Sampel:

TERSEDIA

Bekerja di:

90℃

Fungsi:

Tahan Api

Kuantitas min Order:

200m

Harga:

USD0.03-50

Kemasan rincian:

100m / roll atau disesuaikan

Waktu pengiriman:

sesuai kebutuhan

Menyediakan kemampuan:

10 KM per minggu

Menyoroti

fire rated cable

fire resistant wire

Deskripsi produk

PO / FR-PVC Jacket FRLS Fire Resistant Cable 0.6KV 1KV For Power Distribution Lines

Application

This type of fire resistant and flame retardant cable is suitable for power distribution lines with requirements of flame-retardant or fire-resistant fixed installations.

Reference Standards:	IEC502-1983, IEC331-1970, etc.
Rated Voltage:	600/1000V (0.6/1kV)
Core Number:	Single Core, Two Core, Three Core, Four Core, Five Core (1C, 2C, 3C, 4C, 5C)
Available Dimensions:	1.5mm2, 2.5mm2, 4mm2, 6mm2, 10mm2, 16mm2, 25mm2, 35mm2, 50mm2, 70mm2, 95mm2, 120mm2, 150mm2, 185mm2, 240mm2, 300mm2, 400mm2, 500mm2, 630mm2.
Codes Available:	NH-VV, NH-YJV, NH-VV22, NH-YJV22, NH-VV32, NH-YJV32
Application:	Mica Fire Resistant Cable is used in the environment with high demand on fire-resisting performance such as high-rises building, power station, power plant, mine, chemical industry, subway, and so on. It is recommended that the installation instructions indicated by the Local Electric Code, or any equivalent, be followed, so that the safeguarding of persons and the integrity of the product will not be affected during installation.
Construction:	Mica Fire Resistant Cable
Conductor:	Stranded round copper conductor (Cu), copper wire annealed.
Insulation:	XLPE (Cross-Linked Polyethylene) or PVC (Polyvinyl Chloride)
Core Identification:	1 Core: Brown 2 Cores: Brown, Blue 3 Cores: Brown, Black, Grey 4 Cores: Blue, Brown, Black, Grey 5 Cores: Green/Yellow, Blue, Brown, Black, Grey Alternative core identification: White Cores with Black numbers
Filler:	Polypropylene filament with lapped binding tape
Separator:	Binding tape
Bedding:	PVC (Polyvinyl Chloride) or LSZH.
Armouring:	Single Core: Aluminium Wire Armoured (AWA) Multi-core: Steel Wire Armoured (SWA) or Steel Tape Armoured (STA)
Sheath:	PVC (Polyvinyl Chloride), flame retardant PVC, PE, LSOH, HFFR
Colour:	Black, Gray
Temperature Rating:	0℃ to 90℃ (XLPE), 0℃ to 70℃ (PVC) During short circuit (lasting less than 5 seconds) the maximum temperature of the cable conductor shall not be above 250℃ (160℃ for PVC) Environment temperature should be no lower than 0℃ for laying the cable.
Minimum Bending Radius:	Single Core Cable: Non Armored Cable 20D, Armored Cable 15D Cores Cable: Non Armored Cable 15D, Armored Cable 12D. Remarks: D means practical external diameter of the cable

Application conditions

1. The long-time permissible operation temperature of conductor shall not be higher than 70^oC.

2. Conductor maximum short circuit (not more than 5 seconds) temperature shall not be higher than 160°C.

3. The power cable is not limited by drop in level when being laid, and the ambient temperature shall not be lower than 0°C.

If so, the cable should be preheated.

4. Perfect chemical stability, resistant against acids, alkalis, grease and organic solvents, and flame.

5. Light weight, perfect bending properties, installed and maintained easily and conveniently.

PO / FR-PVC Jacket FRLS Fire Resistant Cable 0.6KV 1KV For Power Distribution Lines 0

Tag: